Integral Temperature Sensor, 0-40″wc thru 835’wc, PUR Cable Standard, Stainless Steel Sensor and Housing
The Model 59T is a dual output Temperature and Level Transmitter able to measure temperatures up to 158°F. A higher accuracy option is available to .25%. PVC and FEP cables are also available. A complete range of accessories for use in level applications are available, many from stock
Features
IP-68 Rated
All Stainless Steel construction
RoHS Compliant
Low Pressure Applications
The Model 59T dual output Temperature/Level Transmitter measures temperatures as low as 32°F thru 158°F.
Polyurethane cable is standard.
Different cable materials and o rings are available.
Use it to measure Liquid Level and Depth for Water and Waste Water applications, Lift Stations, Reservoirs and Dams, Rivers, Holding Ponds, Wells, In-ground/Above Ground Tanks and with Inventory Tank Gauging.
Ranges from 0-40″WC thru 15 ‘WC have combined accuracy of +/- .50% FSO
Ranges greater than 15′ WC have combined accuracy of +/- .35% FSO
An improved accuracy on ranges >15’ is available at 0.25% FSO.
Viatran also offers a complete range of accessories for use in level applications such as a surge protector, cable hangers and weights, meters and junction boxes.
Pressure Ranges: 0-50, 100 Inches Water Column, 0-2, 3, 5 PSI
Combined Accuracy (Non-Linearity, Hysteresis, Repeatability): ≤±0.50% FSO for ranges < 15 Ft. W.C.
Compensated Temperature Range: 32° to 158° F (0 to 70° C)
Operating Temperature Range: 14° to 158° F (-10 to 70° C) **Note: Medium must not freeze near sensor
Storage Temperature Range: -13° to 158° F (-25 to 70° C)
Long Term Stability (%FSO): ≤±0.1% FSO / year at reference conditions
Thermal Effect on Zero: ≤±0.8% FSO per 100° F
Thermal Effect on Span: ≤±0.8% FSO per 100° F
Temperature Accuracy: ≤±1.8° F (1°C)
Output Signal: 4-20 mA (for both the Pressure & Temperature)
Supply Voltage: 10 -30 Vdc (for both the Pressure & Temperature)
Power Supply Regulation: <±005% FSO per volt
Circuit Protection: Reverse polarity protected, CE marked
RFI/EMI: CE EMC compliant as per IEC EN 61326
Voltage Spike Protection: Withstand 1000 volt spike per EN 61000
Response Time: <10mSec
Pressure Connection: Protective POM cap
Ingress Protection: IP 68
Overpressure Limit: 4x Minimum
Burst Pressure: 6x Minimum
Weight: 0.5 lbs. (without cable)
Housing: 316L stainless steel
Sensor Diaphragm: 316L stainless steel
O-ring Seals: FKM
Protective Cap: POM (Polyoxymethylene)
EA: Special Calibration Run
PW: Calibrate item with meter/display
