Waste water, Non-Clogging Design, Hazardous Approvals option
Waste water level sensor with design that prevents clogging. Hazardous location approval option, 3″ Teflon coated diaphragm open face design which helps to prevents clogging. 316 stainless steel body. Integrated cable support loop to support the body. Optional baffle plate to provide increase stability and protection of the sensor. Kevlar reinforced cable prevents cable damage as a result of repeated removal.
Features
Many Options available
All Stainless Steel construction
Low Pressure Applications
Full Scale Pressure Range (FSPR):
- 0-3, 5, 10, 15, 30, 50, 100, 200, 300, 500 PSI
- 0-7, 12, 23, 35, 69, 115, 230, 462, 693, 1154 feet of WC
Combined Accuracy (Non-Linearity, Hysteresis, Repeatability): ≤±0.1% FSO typical (±0.25% FSO max)
Full Scale Output (FSO): 16 mA
Resolution: Infinite
Zero Balance: 4 mA ±0.25%FSO
Long Term Stability: ≤±0.20% FSO per 6 months
Temperature Effect on Zero: ≤±2.0% 50°F (10°C)
Temperature Effect on Span: ≤±2.0% 100°F (37°C)
Compensated Temperature Range: 40°F to 120°F (4°C to 48°C)
Operating Temperature: 20°F to 185°F (-7°C to 85°C)
Storage Temperature Range: 20°F to 200°F (-7°C to 93°C)
Supply Voltage: 9 to 30 Vdc
Power Supply Regulation: ≤±0.0001% per Volt
Output Signal: 4 to 20 mA
Maximum Load Resistance: ≤1050Ω maximum @ 30 Vdc
Circuit Protection: Reverse polarity protected. Over-voltage protected to 1000V <50 mSec duration
Electrical Connection: 3 wire, 22 AWG
Wiring Color Codes:
Red +Power/Signal
Black -Power/Signal
Bare Case ground
Pressure Connection: 2.9” flush sensing diaphragm (Teflon coated)
Proof Pressure: 3 times rated range
Burst Pressure: 5 times rated range
Diameter: 4 inches O.D.
Weight: 24 OZ
Cable Weight: 7 lbs per 1000 feet (polyurethane)
Housing: 316L stainless steel
Pressure Connection Sensor: 316L stainless steel
Cable Options: 316L stainless steel
Mounting: Polyurethane, Tefzel
Identification: Laser etched onto body
Cable Strength: Poly Wire – 30 lbs; Support Line – 100 lbs
DH: Special range
EA: Special calibration run
NH: Customer specified identification
NR: Alternate protection baffle plate with weight hook (max weight 2 lbs)
TG: CSA and FM Intrinsically Safe design
Note:
Application of some available options may affect standard performance.
