0-13′ thru 335′ WC, PUR Cable Standard, PP-HT Housing, Ceramic Sensor, Lowest Cost
The Model 59P Submersible Level Transmitter provides Depth and Level measurements while submerged in harsh or aggressive media. Well suited for chemical tank volume or level monitoring.
Features
IP-68 Rated
RoHS Compliant
Low Pressure Applications
Polypropylene – High Temperature Body
The Model 59P General Purpose Level Transmitter has a 1.38″ diameter Polypropylene High Temperature (PP-HT) housing and ceramic sensor.
Polyurethane cable is standard.
Different cable materials and o-rings are available.
Use it to measure Liquid Level and Depth for Water and Waste Water applications, Lift Stations, Reservoirs and Dams, Rivers, Holding Ponds, Wells, In-ground/Above Ground Tanks and with Inventory Tank Gauging.
Viatran also offers a complete range of accessories for use in level applications such as a surge protector, cable hangers and weights, meters and junction boxes.
Pressure Ranges: 0-13 Feet W.C. to 0-335 Feet W.C.
Combined Accuracy (Non-Linearity, Hysteresis, Repeatability): ≤±0.50% FSO for ranges < 15 Ft. W.C.
Compensated Temperature Range: 13° to 158° F (-25 to 70° C)
Operating Temperature Range: 32° to 122° F (0 to 50° C) **Note: Medium must not freeze near sensor
Storage Temperature Range: 14° to 122° F (-10 to 50° C)
Long Term Stability (%FSO): ≤±0.1% FSO / year at reference conditions
Thermal Effect on Zero: ≤±0.8% FSO per 100° F
Thermal Effect on Span: ≤±0.12% FSO per 100° F
Temperature Accuracy: ≤±0.12% FSO per 100° F
Output Signal: 4-20 mA
Supply Voltage: 8 – 32Vdc
Power Supply Regulation: <±005% FSO per volt
Circuit Protection: Reverse polarity protected, CE marked
RFI/EMI: CE EMC compliant as per IEC EN 61326
Voltage Spike Protection: Withstand 1000 volt spike per EN 61000
Response Time: <10mSec
Pressure Connection: Open Face
Ingress Protection: IP 68
Overpressure Limit: 1.6x Minimum
Weight: 0.5 lbs. (without cable)
Housing: PP-HT (Polypropylene High Temperature)
Sensor Diaphragm: Ceramic Al2O3 96%
Cable: PUR, PVC, or FEP (customer must specify)
Seals: FKM or EPDM (customer must specify)
EA: Special Calibration Run
PW: Calibrate item with meter/display
