0-16″ thru 335′ WC, PUR Cable Standard, PP-HT or PVDF Housing, Ceramic Sensor, Chemical Resistant
The Model 59C Submersible Level Transmitter provides Depth and Level measurements while submerged in viscous or aggressive media. Well suited for chemical tank volume or level monitoring. The semi-flush ceramic sensing face resists clogging and is easily cleaned.
Features
IP-68 Rated
RoHS Compliant
Low Pressure Applications
Polypropylene – High Temperature body
- The Model 59C Chemical Resistant Level Transmitter has a 1.77″ diameter with your choice of Polypropylene High Temperature (PP-HT) or Ethylene Propylene (PVDF), and ceramic sensor.Polyurethane cable is standard.
Cable materials also available in Flourinated Ethylene-Propylene (FEP) and Thermoplastic elastomer (TPE), with various o rings also available.
Viatran also offers a complete range of accessories for use in level applications such as a surge protector, cable hangers and weights, meters and junction boxes.
Pressure Ranges: 0-16 inches W.C. to 0-335 Feet W.C.
Combined Accuracy (Non-Linearity, Hysteresis, Repeatability): ≤ +/-0.35% FSO
Compensated Temperature Range: 32° to 158° F (0 to 70° C)
Operating Temperature Range: -13° to 212° F (-25 to 100° C) **Note: Medium must not freeze near sensor
Storage Temperature Range: -13° to 212° F (-25 to 100° C)
Long Term Stability (%FSO): ≤±0.1% FSO / year at reference conditions
Thermal Effect on Zero: ≤±0.8% FSO per 100° F
Thermal Effect on Span: ≤ ±0.8% FSO per 100° F
Output Signal: 4-20 mA
Supply Voltage: 10-32 Vdc
Power Supply Regulation: <±005% FSO per volt
Circuit Protection: Reverse polarity protected, CE marked
RFI/EMI: CE EMC compliant as per IEC EN 61326
Voltage Spike Protection: Withstand 1000 volt spike per EN 61000
Response Time: <380mSec
Pressure Connection: Open Face/Semi-flush
Ingress Protection: IP 68
Overpressure Limit: 6x Minimum (> 200 Ft. range = 3.5x)
Weight: 0.7 lbs. (without cable)
Housing: PP-HT (Polypropylene High Temperature) or PVDF (Ethylene propylene)
Sensor Diaphragm: Ceramic Al2O3 99.9%
Seals: FKM or EPDM
Cable: PUR, FEP or TPE
EA: Special Calibration Run
PW: Calibrate item with meter/display
