IS Approved, High Accuracy
All-welded Stainless Steel transmitter designed for accurate level measurement in Water, Corrosive media and hazardous locations up to 1,200 foot depth.
Features
Many Option available
All Stainless Steel constructions
IP-68 Rated
Stainless
Pressure Applications
Full Scale Pressure Range (FSPR):
- 0-3, 5, 10, 15, 30, 50, 100, 200, 300, 500 PSI
- 0-7, 12, 23, 35, 69, 115, 230, 462, 693, 1154 feet of WC
Combined Accuracy (Non-Linearity, Hysteresis, Repeatability): ≤±0.15% FSO
Full Scale Output (FSO): 16 mA
Resolution: Infinite
Zero Balance: 4 mA ±0.25%FSO
Long Term Stability: ≤±0.20% FSO per year
Response Time: ≤1 mSec
Temperature Effect on Zero: ≤±1.0% 100°F (37°C)
Temperature Effect on Span: ≤±1.0% 100°F (37°C)
Compensated Temperature Range: 32°F to 180°F ( 0°C to 82°C)
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Storage Temperature Range: -40°F to 250°F (-40°C to 121°C)
Supply Voltage: 9 to 30 Vdc
Power Supply Regulation: ≤±0.0001% per Volt
Output Signal: 4 to 20 mA
Span: <0.25% FSO
Circuit Protection: Reverse polarity protected. Over-voltage protected to 1000V <1 mSec duration
Electrical Connection: 3 wire, 22 AWG
Wiring Color Codes:
Red +Power/Signal
Black -Power/Signal
Bare Case ground
Pressure Connection: 5/8” – 18 UN female thread with protective end cap installed
Proof Pressure: 3 times rated range
Burst Pressure: 5 times rated range
Diameter: 0.875 inches
Weight: Pressure capsule 10 oz.
Cable Weight: 11.3 lbs per 1000 feet (Polyurethane)
Housing: 316L stainless steel
Pressure Connection Sensor: 316L stainless steel
Cable Options: 316L stainless steel
Mounting: Polyurethane, Tefzel
Identification: Laser etched onto body
Cable Strength: Poly Wire – 30 lbs; Support Line – 100 lbs
DH: Special range
DN: Improved accuracy
EA: Special calibration run
NH: Customer specified identification
NR: Alternate protection baffle plate with weight hook (max weight 2 lbs)
TG: CSA and FM Intrinsically Safe design
Note:
Application of some available options may affect standard performance.