0-5 Vdc output, Barometric Pressure
Viatran’s 246 pressure sensor is an electronic pressure transmitter designed to accurately measure barometric pressure to within 0.01 in HgA. The 346 measures pressures over standard ranges of 25 in HgA to 32 in HgA.
Features
All Stainless Steel construction
Low Pressure Application
The 246 pressure transducer meets the requirements for engine test stands and environmental test chambers where extremely accurate barometric readings are crucial.
It is also used in altitude test chambers where it can be scaled to a digital indicator to the pressure or equivalent altitude.
The high accuracy makes it ideal for use in Automated Weather Observation Systems (AWOS) and Automated Surface Observing Systems (ASOS) at airports.
Full Scale Pressure Range: 25″ to 32″ HgA standard (Optional ranges can be factory set from 16″ HgA lower range limit to 35″ HgA upper range limit, 7″ Hg span minimum.)
Non-Linearity (Best Fit Straight Line): ≤±0.007” Hg
Hysteresis & Repeatability: ≤±0.007″ Hg
Resolution: Infinite
Response Time: <±5 mSec
Zero Repeat After 100° F Temperature Shift: < ±0.007″ Hg
Compensated Temperature Range: 70° F to +170° F
Operating Temperature Range: -40° F to +185° F
Storage Temperature Range: -40° F to +250° F
Temperature Effect on Zero: < ±0.01″ Hg per 1° F
Temperature Effect on Span: < ±0.01″ Hg per 1° F
Long Term Stability: < ±0.035″ Hg per 6 months
Supply Voltage: 9 to 40 VDC
Power Supply Regulation: ≤±0.000007″ Hg per Volt
Output Signal: 0 to 5 VDC
Output Signal Noise Levels: < 10 mV peak to peak
Load Resistance: ≥ 10K Ohms
Zero Balance: Actual output at 25″ HgA will be etched onto body. Tolerance of stated value is <±0.01″ Hg of actual.
Span: Actual output at 32″ HgA will be etched onto body. Tolerance of stated value is <±0.01″ Hg of actual.
Circuit Protection: Reverse polarity protected. Output may be short circuited indefinitely. Input circuit protected to 1000 Volts
Insulation Resistance: ≤ 5nS
Electrical Connections: Bendix PT02E-10-6P, mates with PT06E-10-6S (SR)
Wire Pin Code:
A + Power / Signal
B – Power / Signal
C No Connection
D No Connection
E No Connection
F No Connection
Pressure Connections: 1/4″ NPT Female
Proof Pressure: 85 PSIA (173″ HgA)
Burst Pressure: 2K PSI
Pressure Cavity Volume: 0.25 cubic in.
Mounting: May be supported by pressure port.
Wetted Parts: 316 Stainless steel, Viton “O”-Ring
Housing: 304L Stainless steel
Weight: 15 oz.
Identification: Laser etched onto body
Alternate Electrical Connectors:
BA: (K)PTIH-12-8P
BE: Aphenol 165-15
BF: (K)PTIH-10-6P
BG: DIN 43650
BI: CF3102E-14S-2P
BK: WK4-32S
BL: WK6-32S
BM: WKA7-32S
BN: (K)PTIH-8-4P
BQ: (K)PT02H-10-6P
BR: CF3102E-14S-6P
BS: CF3102E-14S-5P
Performance options:
DG: Improved temperature performance to 0.00072″ Hg per 1° F (zero and span)
DH: Special ranging
EA: Twenty point calibration run at specified temperature
GE: Buna “O”-Ring
NH: Custom identification
Alternate Pressure Ports:
YA: MS33649-04
YH: 1/8″ NPT(M)
YI: 1/8″ NPT(F)
YK: 1/4″ NPT(M)
YN: 3/8″ NPT(F)
YP: 1/2″ NPT(M)
YR: 1/2″ NPT(F)
Note: Application of some available options may affect standard performance.
