Calibration Software and Accessories
Viatran has patnered with ProConsol to bring an “easy to use” method for calibrating hammer unions in the field.
DevCom2000-Lite software enable your PC to communicate with Viatran Models 511, 521 & 522 Hammer Union Pressure Transmitters via the HART®communication protocol.
All you need to get started is a Windows® based PC or laptop, a HART®Modem and 250Ω loop resistors to connect to the Viatran hammer union pressure transmitter.
Field Adjustment for Models 511, 521 and 522 Hammer Union Pressure Transmitters
Software, modems, cabling, test connections and components required in order to field calibrate your 511, 521 or 522 hammer union pressure transmitter.
HART® Modem w/ USB Connector, 4 ft.Cable & mini-grabber ends
HART® Modem w/ RS232 Connector, 4 ft.Cable & mini-grabber ends
HART® Modem w/ USB Connector, 4 ft.Cable & banana plug ends
HART® Modem w/ RS232 Connector, 4 ft.Cable & banana plug ends
Banana Jack Connector Kit
Power Xpress- Power solution kit w/ resistor (black box), cables & clips (Modem NOT included)
24 VDC Power Supply
HART® 250 Ohm Loop Resistor