4-20 mA, 0-100 Bar thru 0-350 Bar
RM 570 transmitters provide a rugged, sealed solution for the harsh industrial environments found in Rolling Mills and the metals industry.
Features
Many Options available
All Stainless Steel construction
High Overpressure Applications
IP-68 Rated
All welded construction and stainless steel surfaces makes the RM570 ideal for harsh environments.
Viatran’s rugged pressure transmitters are designed to withstand heat, vibration, pressure spikes and EMI/RFI caused by the the surrounding equipment.
All Viatran Rolling Mill units are built and configured to order with a choice of four pressure ranges,ensuring you have the best solution for your application.
Full Scale Pressure Range (FSPR):
- 0-100 Bar (0-1450 psi)
- 0-150 Bar (0-2175 psi)
- 0-250 Bar (0-3625 psi)
- 0-350 Bar (0-5076 psi)
Static Error Band: ≤±0.25% FSO typical (Includes BFSL, Hysteresis and Repeatability by RSS)
Full Scale Output (FSO): 4-20 mA (16 mA FSO)
Zero and Span Balance: ±1% FSO
Response Time: <2 mSec to reach 90% FSO
Temperature Effect on Zero: ≤±1% FSO per 100°F (55.5°C)
Temperature Effect on Span: ≤±1% FSO per 100°F (55.5°C)
Compensated Temperature: 70°F to 170°F (21°C to 76°C)
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Storage Temperature Limit: -65°F to 185°F (-53°C to 85°C)
Supply Voltage: 12 to 30 Vdc
Power Supply Regulation Effect: ≤±0.02% FSO per Volt
Output Signal: 4 – 20 mA
Bridge Impedance: 5000 Ohms nominal
Circuit Protection: Varistor protected across the input leads for surges above 40 V and currents to 250 Amps peak with a pulse width of 8×20 μSecs. Reverse polarity protected.
Insulation Resistance: >200 MegOhms to case ground
Electrical Connection – BH (Standard): 6-pin hermetic, bayonet-style, 303 SST weld mount connector
Pin Outs (standard): (Consult engineering for alternative configurations)
Pin A +Power/Signal
Pin B No Connection
Pin C -Power/Signal
Pin D No Connection
Pin E No Connection
Pin F No Connection
ZU (optional) Direct Coupled Cable – Custom wiring per your application
Pressure Connections:
- G 1/2A BSP(M) with Bleed Port*
- G 1/2A BSP(M) without Bleed Port
- G 1/4B BSP(M) without Bleed Port
Proof Pressure: Up to 4 times FSPR (1378 Bar* (20,000 psi), whichever is less)
Burst Pressure: ≥ 6 to 10 times FSPR dependent on sensor, consult engineering for details
Mounting: Supported by process piping or optional mounting bracket
Enclosure: 15-5 PH and 316 stainless steel
Wetted Parts: 15-5 PH stainless steel
Shock Limitation: 100 G’s
Weight: 17 oz. (0.482 kilograms) typical
Identification: Laser etched onto body
Enclosure: Classification IP68
B ( ): Alternate Electrical Connections**
DF: Bleed port (10K PSI and below)
EA: Special calibration run
NH: Customer specified identification
NJ: CE Marking
Y ( ): Alternate pressure ports
ZU: Direct Coupled Cable**
Note:
Application of some available options may affect standard performance.
* For safety purposes, Viatran will only proof pressure in production to 700 Bar (10.000 psi) for units with Bleed Ports.
** Custom wiring/pin outs available for your application.
Print Page
