0%

MODEL 510 HAMMER UNION PRESSURE TRANSMITTER

  • Model 510 Hammer Union Pressure Transmitter

Oil Well Drilling, Cementing, Fracturing and Acidizing

Our exclusive semi-flush design provides a lower cavity volume to prevent clogging. This eliminates the need for tedious cleaning, especially in cementing applications.

Features

 1502 Hammer Union Pressure Fitting

 RoHS Compliant

 ShuntCal

 RapidShip – 2 Day Turnaround

Performance

Full Scale Pressure Range:  0-5K, 6K, 10K, 15K, 20K PSIS (0-345, 414, 689, 1034, 1379 bar)

Combined Accuracy (BFSL):  (Non-Linearity, Hysteresis & Repeatability)     ≤± 0.25% FSO

Full Scale Output (FSO):  16 mA ±1% FSO

Zero Balance:  4 mA ±1% FSO

Long-Term Stability:  ≤±0.25% FSO per 6 months

Response Time:  ≤2.5 mSec to reach 90% of FSO

Compensated Temperature:  40°F to 140°F (4°C to 60°C)

Operating Temperature:  40°F to 185°F (-40°C to 85°C)

Storage Temperature Limits:  -67°F to 302°F (-55°C to 150°C)

Temperature Effect on Zero:  ≤±1% FSO per 100°F (37°C)

Temperature Effect on Span:  ≤±1% FSO per 100°F (37°C)

Electrical

Supply Voltage:  10.5 to 28 Vdc

Power Supply Regulation Effect (Calibrated at 12 Vdc):  ≤±0.01% FSO per Volt

Output Signal:  4 – 20 mA at 70°F (21°C)

Loop / Load Impedance:  750 Ohms at 24 Vdc decreasing linearly to 0 Ohms @ 9 Vdc

Range Calibration Signal:  100% of FSPR

Calibration Power:  7.5 to 28 Vdc at 15 mA nominal

Calibration Signal Accuracy:  ≤±0.2% FSO. The exact signal to pressure correlation is provided with each unit

Circuit Protection:  Varistor protected across the input leads for surges to 1000V at 50 microseconds (Reverse polarity protected)

Bridge Resistance:  10K Ohms nominal

Insulation Resistance:  < 5nS to case ground

Electrical Connection:  Mates with Bendix P/N PT06E-10-6S(SR) or equivalent

PIN OUTS:

PIN A    +Power/Signal
PIN B     -Power/Signal
PIN C      No connection
PIN D      No connection
PIN E    +Calibration
PIN F     -Calibration
NOTE:
Some models are provided with customer specified wiring. Consult Viatran for exact wiring connections.

Mechanical

Pressure Connection:  Male hammer union 2 inch #1502

Pressure Cavity Volume:  < 0.78 cubic inches

Proof Pressure:  1.67 times the FSPR or 22.5K PSI (1550 bar) for union #1502

Burst Pressure:  3 times the FSPR, limited by union #1502: 22.5K PSI (1550 bar)

Materials Of Construction

Enclosure Materials:  304 stainless steel

Wetted Materials:  Inconel X-750, heat treated per NACE MR0175-2000

Shock Limitation:  100 G’s

Weight:  5.5 lbs nominal (2.4 kg)

Identification:  Laser etched onto body

Enclosure Classification:  NEMA 4X

Option

DH:  Special range

EA:  Special calibration run

NK:  ATEX Intrinsic Safety label

NX:  CSA Intrinsic Safety label

TF:  FM Intrinsic Safety label

ZQ:  CG379-C-145-2P (Glenair) electrical connector

TW:  Russia Intrinsic Safety