0%

TM1001 QFN-3x3mm-12L

2.4-2.5HGz ISM Band Power Amplifier

A low cost, high linearity, medium power, high efficiency amplifier IC designed for IEEE 802.11b/g, Bluetooth class 1, and other application in the 2.4GHz IUSM band.

Features :

  • Integrated Power Detector Circuit
  • Analog Gain Control and Power Control
  • QFN-12L 3x3mm with thermal ground
  • RoHS compliant
  • MSL 1

Applications :

  • Bluetooth™PA (Class 1)
  • WLAN 802.11 b/g
  • Wireless Data Terminal
  • Cordless Handset
  • Portable Battery Power Equipment

TM1002 WCSP 1.1×0.75X0.37mm

2.3~2.7GHz Low Noise Amplifier with bypass RF switch

A Low-Noise Amplifier (LNA) with bypass switch for 2.3~2.7 GHz receiver application, available in a WLCSP.

Features :

  • Operating frequency from 2300MHz to 2690MHz
  • Noise figure = 0.95 dB
  • Gain 13dB with matching circuit
  • Bypass switch insertion loss of -2.2 dB
  • High input 1 dB compression point up to -1 dBm
  • High in band IP3i of 3.5 dBm
  • Supply voltage 1.5 V to 3.1 V
  • Integrated supply decoupling capacitor in the IC already
  • Optimized performance at a supply current of 5.8 mA
  • Bypass mode current consumption <1µA
  • Integrated temperature stabilized bias for easy design
  • Requires only one input matching inductor
  • Input and output AC coupled
  • Integrated matching for the output
  • Available in a WLCSP type package of 0.69mm x 0.44mm x 0.29mm
  • ESD protection on all pins (HBM > 2 Kv)
  • Meet Moisture sensitivity level 1
  • REACH/RoHS complaint

Applications :

  • LNA for LTE reception in smart phones
  • LNA good for 2.14GHz applications
  • LNA good for Zigbee
  • 45GHz RH front-end modules
  • Features phones
  • Tablet PCs

TM1006 QNF-3x3mm-12L

3GHz Low Noise Amplifier HBT MMIC

A Low Noise Amplifier (LNA) provides 28.5dB gain and 1.1dB noise figure for GPS (Global Positioning System) application in 1.57542GHz

Features :

  • Single Positive Supply: +3.3V
  • Gain: 28.5dB
  • Noise Figure: 1.1dB @ 1.575GHz
  • Gain Adjustment: 25dB
  • Low Current Consumption: 10.5mA from a +5.5V supply
  • 3mm x 3mm ultra small QFN leadless package
  • RoHS compliant
  • MSL 1

Application :

  • GPS

TM1007 QFN-3x3mm-16L

2.4GHz high linear power amplifier MMIC

A Low cost , high power, high efficiency amplifier IC designed for wireless data application at 2.4GHz to 2.5GHz ISM band.

Features :

  • Analog Gain control and Power control
  • QFN-3×3 16L with thermal ground ultra small plastic package
  • Pout = 19dBm for 64QAM/54Mbps OFDM
  • 26dB Power Gain
  • Linear Output Power 19dBm/IEEE 802.11g
  • Linear Output Power 23dBm/IEEE 802.11b
  • MSL 1

Applications :

  • Bluetooth™ PA (Class 1)
  • WLAN 802.11b/g for 11Mbpds, 22Mbps, 54Mbps
  • Wireless Data Terminal
  • Portable Battery Powered Equipment

TM1008

DC to 3GHz RF Transistors as a Gain Block or LNA MMIC

A low cost, low noise transistors as a gain block, power driver and packaged in M04 package.

Features :

  • Low Noise Figure, NF=1.68dB at Frequency=2.4Ghz
  • P1dB=15 dBm biased +3.3V at 2.4Ghz
  • Gain: 13dB@2.4Ghz
  • Very Low Cost M04 package

Applications :

  • Wireless application, e.g. analog and digital cellular telephones, Cordless telephones (GPS, DECT, PHS, Bluetooth, WLAN, Zigbee)
  • RF front end
  • Pagers
  • CATV, Cable Moderm

TM1009 DFN-1.5×1.5mm-6L

3GHz ultra small package Low Noise Amplifier MMIC

A low cost and low noise amplifier (LNA) IC, designed for GPS, DVB, PHS and DECT applications in L Band.

Features :

  • Single Positive Supply: +3.3V
  • Gain: 20dB, NF: 21.4dB at 2.4GHz
  • Gain: 28dB, NF: 1.1dB at 1.57542GHz
  • Low Current Consumption: 10.5mA from a +5.5V supply
  • QFN 1.5mm x 1.5mm ultra small leadless package
  • RoHS compliant
  • MSL 1

Applications :

  • WiFi, GPS, DVB, PHS, DECT

TM1010 QFN-3x3mm-16L

2.4GHz single chip Front HBT MMIC

Features :

  • High Efficient Power Amplifier is 24dB Gain and power added efficiency 41% at Pout = 23dBm
  • Low-Noise Amplifier gain 13dB and NF typical 1.6dB
  • QFN 3x3mm 16L with thermal ground ultra small plastic package
  • Green
  • MSL 1

Applications :

  • WiFi
  • Bluetooth™PA (Class 1)
  • Wireless Data Terminal
  • Wireless Audio
  • Portable Battery Powered Equipment

TM1011 QFN-3x3mm-16L

WiFi 802.11b/g/n High-Gain Power Amplifier

A low cost, high gain, high power, high efficiency amplifier IC designed for wireless data application over ISM band

Features :

  • Analog Gain Control and Power Control
  • QFN-3×3 16L with thermal ground ultra small plastic package
  • Pout = 19dBm for 64QAM/54Mbps OFDM
  • 32dB Power Gain
  • Linear Output Power 19dBm/IEEE 802.11g
  • Linear Output Power 23dBm/IEEE 802.11b
  • Green
  • MSL 1

Applications :

  • Bluetooth™PA (Class 1)
  • WLAN 802.11b/g for 11Mbps, 22Mbps, 54Mbps
  • Wireless Data Terminal
  • Portable Battery Powered Equipment

TM1016 DFN-2x2mm-8L

5.8GHz Power Amplifier HBT MMIC

A low cost, high linearity, low power consumption, high efficiency amplifier IC designed for IEEE 802.11a, ETC, Wireless Audio/Video and other application in the 5.8GHz ISM band.

Features :

  • Analog power control
  • DFN-8L 2x2mm with thermal ground
  • RoHS compliant
  • MSL 1

Applications :

  • 11a
  • Wireless Audio/Video
  • 8GHz ETC
  • Wireless Data Terminal
  • Cordless Handset
  • Portable Battery Powered Equipment

TM1017/18

6GHz e-HEMT low noise amplifier and power amplifier MMIC

  • Provides outstanding performances under 6GHz: with 18dB gain, 0.3dB NF, P1 dB 26dBm.
  • A good LNA and also a Power amplifier.

Packaged in a 2x2mm-4L package with RF GND pad on bottom side

TM2006 QFN-3x3mm-16L

2.4~2.5GHz Front End MCM IC

Ideal for IEEE 802.11b/g, Bluetooth, 2.4GHz Audio/Video, Wireless Data Terminal and portable battery powered equipment.

Features :

  • High Efficient Power Amplifier: 32% at Pout = 22.5dBm
  • P-1dB: +21dBm Typical @ +3.3V
  • Low-Noise Amplifier (NF typical 1.8dB)
  • Low Insertion Loss: 0.5dB @ 2.45GHz
  • IIP3: 55dBm @ Input Power Up to 20dBm
  • QFN 3x3mm 16L with thermal ground ultra small plastic package
  • MSL 1
  • RHHS, PFOS, REACH compliant

Applications :

  • Bluetooth™PA (Class 1)
  • Wireless Data Terminal
  • Wireless Audio/Video
  • Portable Battery Powered Equipment

TM2008 QFN 3-3mm-16L

2.4~2.5GHz Front End MCM IC with high gain LNA

  • Provide 0.5dB insertion loss and 30dB isolation
  • LNA gain has 13 dB gain and 1.6dB NF
  • Good for high data rate application
  • Improve the receiving sensitivity

TM2009 QFN-4x4mm-20L

2.4-2.5 GHz RF Front-End MCM IC

  • Ideal for IEEE 802.11b/g, Bluetooth, 2.4Ghz Audio/Vidoe, Wireless Data Terminal, and portable battery powered equipment
  • PA delivers +23dBm (maximum) output power with a high Power Added Efficiency (PAE) 41%
  • Noise figure of LNA is below 1.8dB
  • RF SPDT Switch has very low insertion loss 0.4dB in the 2.4GHz to 2.5GHz range

Packaged in a QFN 4mmx4mm 20L package

TM2010/18 QFN-3x3mm-16L

High Power high gain power amplifier MMIC

Small and thin package size makes the device an ideal solution for radios built in small form factors for mobile application

Features :

  • 4 to 2.5GHz Operating Range
  • 33dB Gain
  • 3% EVM at Pout=+26 dBm with lcc = 420mA @ Vccb=3.3V, Vcc=5V
  • On-chip power detector
  • 8mm 16-pin QFN Package
  • RoHS compliant product

Applications :

  • IEEE 802.11b/g/n WLAN Mobile
  • 4GHz Cordless Phone
  • 4GHz ISM Radios

Access Points

TM3001 SOT-363

2.4GHz RF switch SPDT in SOT-363 package

A GaAs SPDT switch MMIC in a SOT-363 6 lead plastic package.

Low insertion loss and positive voltage operation with low DC power consumption

Variety of analog and digital wireless communication systems

Features :

  • Insertion Loss: 0.4dB @ 2.5GHz
  • P-1dB: +30dBm Typical @ +3V
  • IIP3: 55dBm @ input Power up to 20dBm
  • Good Reliability Performance
  • SOT-363 6 Lead Plastic Package
  • T/R Switched in 802.11b, g WLAN Systems

Applications :

  • WLAN
  • Mobile Phone
  • Bluetooth
  • DECT
  • PHS
  • GPS

TM3005 DFN-1.5×1.5mm-6L

6GHz SPDT RF switch in DFN-1.5×1.5mm-6L

Low insertion loss and positive voltage operation with low DC power consumption

Variety of analog and digital wireless communication systems

Features :

  • Insertion Loss: 0.6Db @ 5.8GHz

0.4Db @ 2.5GHz

  • Isolation: 35dB @ 5.8GHz

       25dB @ 2.5GHz

  • P-1dB: +66dBm Typical +3V
  • IIP3:45dBm @ Input power up to 18dBm
  • Good reliability performance
  • DFN 1.5×1.5×0.75mm 6 lead plastic package
  • T/R Switches in 802.11b/g/n WLAN Systems

Applications :

  • WLAN
  • Bluetooth
  • Mobile Phone/ PHS/ DECT/ GPS
  • IOT