TM5004
2.4GHz High power booster for WiFi
- A bi-directional booster designed to extend the range of wireless radio devices which require high linearity amplification
- Effective as used with 802.11g application
- Provides transmit gain and low-noise receive gain to increase the range and compensate the cable loss in installation
TM5200
2.4GHz bluetooth audio module with TWS
A low power consumption, highly integrated Bluetooth system as an audio module
Full programmability with an SIP 8M FLASH memory device and can be used for both control and multimedia hybrid applications
Features :
- Operation voltage from 2.8V to 4.2V
- 9mA average current fro A2DP
- 300UuA for 500ms sniff current
- 8uA deep sleep current
- Bluetooth 4.2 classic and low energy
- A2DP v1.3, AVRCP v1.6, HFP v1.7, HID v1.1, AVCTP v1.4, AVDTP v1.3, and SPP v1.2 profile
- True wireless stereo and two active link
- Two wires UART download interface
- 16 bits stereo ADC and DAC
- Stereo line in and dual microphone
- Five bands digital hardware equalizer
- SPI, UART, I2C, SDIO and USB
- I2S master and slave interface with MCLK output
- Interface for external PA and LNA
- Up to 220mA battery charge controller
Applications :
- Bluetooth stereo speaker with TWS
- Bluetooth Audio system linked with mobile phone
- Bluetooth Sound Bar
- Bluetooth stereo headset
- Bluetooth control and multimedia hybrid
TM5201
2.4GHz Bluetooth audio module with DSP
- Audio Module with TWS/DSP and antenna in the Module
- Include a M3 MCU, a Bluetooth transceiver, an antenna, a crystal all on the FR-4 substrate
- Stamp and leadless type pins
TM5202
2.4GHz Bluetooth audio module with D amp
- Audio Bluetooth Module with Class D amplifier and also TWS/DSP and antenna in the Module
- Include M3 MCU, a Bluetooth transceiver, an antenna, a crystal all on the FR-4 substrate
- Stamp and leadless type pins
TM5029
5G 38GHz phase array antenna front end module
- Works in 38GHz ideally for 5G phase array antenna system
- Include power amplifier, low noise amplifier, switch, programmable phase shifter, programmable attenuator, and voltage regulator
- Provides signal amplifying, transmitter and receiver functions
- Switch circuit can control Tx and Rx path of the module
- 5 bits programmable attenuator can control amplitude in the range 0~30dB and above
- 5 bits programmable phase shifter provide phrase adjust in 0~360 degree
- Input pins are RF u=inputs, digital control and voltage supply
- Operating frequency: Ka Band, Band width>1000MHz
- Dimension: 60x10x4.5mm